SHINSUNG Co., Ltd.

We produce a heater with 2 types of heating material which are wire and stripe made of Fe-Cr-Al and Ni-cr.
We produce it variously by using accessories.

The Ceramic heater is called as a molding heater
And the Fe-Cr-Al heating material is buried in a ceramic refractory.
We produce various types (including circle, plate, split, etc.)
And use for building a heating material of various kinds of furnaces.

Radiant tube is made with heating material(Fe-Cr-Al/ Ni-Cr) and ceramic tube.
We use 304, 310s and inconel pipes as well. This heater is replaced relatively faster than others.

The Cartridge heater is a filled and compressed heater winding heating wires
around magnesia pipe which covered with sheath.
Sockets are on one side.
It can supply sufficient heat rate by injecting maximum heat rate to minimum area.
It is used for press die, metal mold for casting, automatic packing machine and so on.

Those heaters, called Pipe heater, made with pipes.
Heating wires are buried at the center in a shape of coil
and they are filled and pressed by oide of magnesium as insulation.
We produce various kinds of shapes and use of sheath heater.
Fan heater using for high temp blower and Injection heater for heating water and oil.